NETGEAR WN3000RP User Manual page 10

4. Connect your existing WiFi devices to the new extended network.
Use the same WiFi password that you use for your WiFi router.
5. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
6. Plug the extender into an electrical outlet and wait one minute.
The Power LED
button.
7. Use the Router Link LED on the front panel to help you choose a spot where the
extender-to-router connection is optimal.
Connect with NETGEAR genie Smart Setup
You can use a web browser to connect to the extender and set it up.

To connect with the browser-based Smart Setup:
1. Use a WiFi network manager on a computer or mobile device to find and connect to the
extender WiFi network.
After the connection with the computer or mobile device is established, the Client Link
LED lights solid green.
2. Open a web browser window from the same computer or mobile device.
The browser takes you directly to NETGEAR genie smart setup.
Note: If you are not automatically directed to NETGEAR genie, launch a web
browser and enter www.mywifiext.net in the address field. Enter
admin for the user name and password for the password.
3. Select a WiFi network to extend and click the Continue button.
4. In the Password field, type the network password (also called passphrase or security key)
and click the Continue button.
N300 WiFi Range Extender
lights green. If the Power LED does not light, press the Power
Install Your Extender
10