Solenoid Shift Electric Starters; Operation – Solenoid Shift Starter; Nippondenso Solenoid Shift Starter - Kohler CH18-745 Service Manual

Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
Figure 8-38. Style ''B'' Commutator End Cap with
Brushes.
6. Install the thru bolts and tighten securely.
7. Lubricate the drive shaft with Kohler bendix starter
drive lubricant (Part No. 52 357 01-S). Install the
drive components following the instructions for
servicing the starter drive.
Starter Assembly
Figure 8-39. Nippondenso Solenoid Shift Starter.
Electrical System and Components

Solenoid Shift Electric Starters

The following subsection covers the solenoid shift
electric starters. Much of the information in the
proceeding subsection relates to this type starter also,
so it is not repeated here. A Nippondenso or Delco-
Remy solenoid shift starter may be used. The
Nippondenso starter is covered first, and the Delco-
Remy starter servicing follows.
Operation – Solenoid Shift Starter
When power is applied to the starter the electric
solenoid moves the drive pinion out onto the drive
shaft and into mesh with the flywheel ring gear. When
the pinion reaches the end of the drive shaft it rotates
the flywheel and cranks the engine.
When the engine starts and the start switch is released
the starter solenoid is deactivated, the drive lever
moves back, and the drive pinion moves out of mesh
with the ring gear into the retracted position.
Nut
Drive
Lever
Dust
Cover
Solenoid
Nut
Armature
www.mymowerparts.com
Drive
End Cap
Front Stop
Collar
Retainer
Rear Stop
Collar
Drive
Pinion
Section 8
Frame
8
Wire
Brushes
Brush
Holder
Brush Spring
Insulator
Commutator
End Cap
Thru Bolt
8.27