Channel Box Test Commands - Panasonic G600 Service Manual
Personal cellular telephone, handheld portable, battery packs, handsfree car mount kit, easy fit car kit, hands free car kit, simple car kit, dc adaptor, dual charger, ac adaptor, data interface cable, sms interface cable
Hide thumbs
Also See for G600:
- Technical manual (45 pages) ,
- Service manual (113 pages) ,
- Service manual (108 pages)
Table of Contents
Advertisement
7.4
Channel Box Test Commands
The following table outlines the commands available using the channel-box software.
After the handheld unit has been switched on (section 7.3), use the up/down scroll keys on the personal computer
keyboard to select the channel-box command. Use the left/right scroll keys to display the required indication and
press the ENTER key to select the displayed function.
CHANNEL BOX COMMAND
TEST MODE
INITIALIZE
CHANGE CH
POWER LEVEL
TX DATA
RSSI (DBM)
SET AGC 1
SET AGC 2
SET AGC 3
SP LOOP BACK
PATH CONT
VOL. BUZZ
VOL. SIDE
VOL. MIC
TAM CONT
VOL. SP1
VOL. SP2
GET KEY CODE
MCUK980101C8
Service Manual
INDICATION
<TERM>
<ReST>
<INIT>
<xxx>
<xxx>
<NRL 0>
<NRL 1>
<NRL R>
<ACC R>
<xxx>
<xxx>
<xxx>
<xxx>
<START>
<STOP>
<MOSO>
<MESI>
<MESE>
<MISI>
<MISE>
<xx>
<xx>
<xx>
PLAY ON
PLAY OFF
REC ON
REC OFF
<xx>
<xx>
<ENABLE><DISABLE>
Section 7
7 - 7
TEST AND MEASUREMENT
FUNCTION
Terminates test mode.
Restarts test mode.
When RETURN is pressed this will
reset the default channel settings.
Sets up predefined channel
settings.
Allows a specified power level to be
set at the UUT.
Sets TX Modulation to:
Normal burst DATA all 0s
Normal burst DATA all 1s
Normal burst DATA all random
Access burst DATA random
Provides an RSSI reading on the
User specified channel.
Allows changes to AGC levels on
LOW, MIDDLE, HIGH channels.
Provides an audio path for use with
the GSM test station.
Sets audio loop-back from TX
audio to RX audio without
processing by the CODEC
Sets audio paths:
MIC off speaker off
MIC external speaker internal
MIC external speaker external
MIC internal speaker internal
MIC internal speaker external
Sets buzzer volume between
values
0 to 3 (Min to Max)
Sets 4 side tone volume levels
between
0dB and -18dB
Sets 8 MIC volume levels between
26dB and 40dB
Switches on Voice Memo Playback
Switches off Voice Memo Playback
Record Voice Memo on
Record Voice Memo off
Sets speaker pre-amp volume
levels
Sets speaker volume levels
Displays the value of a key pressed
on the keypad
Issue 1
Revision 0
Advertisement
Table of Contents
