Table of Contents
Advertisement
5-7-2 Indication linked to control output (OSSD 1 / 2)
Indication takes place on the application indicator in accordance with the control output (OSSD
1 / 2).
Indication linked to control output (OSSD 1 / 2) takes place on the emitter and receiver in the
case of line synchronization, and only on the receiver in the case of optical synchronization, so
the settings are written to the receiver.
5-7-3 Indication linked to interlock
Indication takes place on the application indicator in accordance with the interlock function.
Indication linked to the interlock function takes place on the emitter and receiver in the case of
line synchronization, and only on the receiver in the case of optical synchronization, so the set-
tings are written to the receiver.
5-7-4 Indication linked to test function
Indication takes place on the application indicator in accordance with the test function.
Indication linked to the test function takes place on the light curtain's emitter and receiver in the
case of line synchronization, and only on an emitter or receiver equipped with the test function
in the case of optical synchronization.
In the case of optical synchronization, settings by the software tool are written to an emitter or
receiver equipped with the light curtain's test input wire (pink).
5-7-5 Interrupt display function
When the light curtain is in one of the states indicated below, this function allows interrupt indi-
cation of that state, regardless of whether the current application indicator state is "5-7-1 Indi-
cation by application indicator input", "5-7-2 Indication linked to control output (OSSD 1
/ 2)", or "5-7-3 Indication linked to interlock".
● Lockout
● Muting
● Override
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
Functions
83
Advertisement
Table of Contents
