Panasonic G600 Service Manual page 65
Personal cellular telephone, handheld portable, battery packs, handsfree car mount kit, easy fit car kit, hands free car kit, simple car kit, dc adaptor, dual charger, ac adaptor, data interface cable, sms interface cable
Hide thumbs
Also See for G600:
- Technical manual (45 pages) ,
- Service manual (113 pages) ,
- Service manual (108 pages)
Table of Contents
Advertisement
2. Ensure that the following settings are made:
a) Interface box IFB002
Power:
IGN:
Mode
Voltage
b) Power supply
+12V DC:
c) PC
Channel box software loaded and the screen indicating as shown (figure 6):
Figure 6: PC Screen (SCRN10)
3. Press ENTER on the PC keyboard.
4. Switch on the +12V supply.
5. At the PC press F10.
6. At the Interface box switch the power to ON.
7. Steps 5 and 6 above must be carried out within 1 second or power ON will time-out.
NOTE:
The display will read:
The back light will be illuminated and all LEDs will be lit.
Go to section 7.4 (Channel Box Test Commands) for further testing information.
Power On in Normal Mode
1. ( Figure 7) Connect together the test equipment.
Figure 7: External test equipment setup
MCUK980101C8
Service Manual
UP position
DOWN position
UP position
Dependent upon operation:
7.2V for Lithium Ion battery
5.6V for PCB testing
4.8V for Nickel Metal Hydride battery
OFF
GET STATION
ADDRESS = _ _
INFO = _ _
Section 7
7 - 5
TEST AND MEASUREMENT
600-0720
600-0706
Issue 1
Revision 0
Advertisement
Table of Contents
