Important Error Messages - Panasonic G600 Service Manual

3.10 Important Error Messages

The following table is a list of error messages that may occur during use of the telephone, with a description and
suggested course of action:
Area not
Roaming in the selected area is not allowed
Allowed
Network
Roaming with the selected network is not allowed
not Allowed
Security The network has detected authentication failure because your SIM is not registered with that
Failure network. Contact your Service Provider
SIM The SIM is blocked because the wrong PUK has been entered ten times. Contact your Service
Blocked Provider
The telephone has detected a problem with the SIM. Switch the telephone off and then back on. If
SIM Error
the message does not disappear contact your Service Provider
Message A message has been received but the message store is full. To receive messages, delete some of
Rejected the currently stored messages or set messages to automatically clear (Menu: Messages:
Store Full Parameters: Auto Delete)
PIN2 The PIN2 is blocked permanently because the wrong PUK2 has been entered 10 times. Services
Invalidated controlled by PIN2 cannot be used. Contact your Service Provider
Warning
The message area is full. Your messages cannot be stored until some of the currently stored
Store Full
messages are deleted
Continue?
Auto Redial
Redial list of unsuccessfully dialled numbers is full. Switch the telephone off and then on again
List Full
MCUK980101C8
Service Manual
Section 3
3 - 9
OPERATING INSTRUCTIONS
Issue 1
Revision 0