Panasonic G600 Service Manual page 54

TECHNICAL SPECIFICATIONS
6.2.3 Rx Characteristics
1. Sensitivity
The reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is
appropriate) is specified in the following table, according to the propagation conditions.
Type of Channel
TCH/FS (FER)
Class Ib (RBER)
Class II (RBER)
The reference sensitivity level is <-102dBm.
NOTE:
1 1.6. The value of
and class Ib RBER measurements for the same channel condition.
2. Blocking:
Interferer Frequency (MHz)
Offset from wanted carrier
(in band 915 - 980MHz)
Out of band frequency bands
Measurement Conditions:
Wanted carrier is 3dB above reference sensitivity.
Interferer is CW
Spurious response exceptions:
6 exceptions are permitted IN band 915 - 980MHz
24 exceptions are permitted OUTSIDE band 915 - 980MHz.
3. Intermodulation Characteristics:
Interferer Level (f1 & f2) dBm
Issue 1
Revision 0
PROPAGATION CONDITIONS
TU50
Static
(no FH)
0.1 % 6 %
0.4/ % 0.4/ %
2% 8%
can be different for each channel condition but must remain the same for FER
600kHz
800kHz
1.6MHz
0.1 - 915
980 - 12750
-49
TU50
(ideal FH)
3 %
0.3/ %
8%
Interferer Level (dBm)
Interferer Frequencies (f1 & f2)
Wanted frequency =
2f1 - f2, and | f2 - f1 | = 800kHz
Section 6
6 - 4
RA250 HT100
(no FH) (no FH)
2 %
0.2/ % 0.5/ %
7%
-43
-33
-23
0
0
MCUK980101C8
Service Manual
7 %
9%