CHAPTER 3. REPAIR INSTRUCTION
3.5 Adjustment Procedure
3.5.1 CCD Adjustment
I Tools Used
• Personal Computer
• ADJUSTMENT SOFTWARE
• Compact Power Adapter CA-PS500
• AC Cable
1
Click the "CCD" button.
2
When the message on the right appears, go to 3.
3
1. Place the camera so that lens is set against the
light source surface of the Brightness Box via
the C-12 Filter.
2. Set the Brightness Box to EV12.
3. Click the "ADJUST" button.
* When the adjustment does not work, click the
"Default" button.
• DC Coupler DR-500
• INTERFACE CABLE IFC-300PCU
• Brightness Box (light source A)
• C-12 Filter
C-12 Filter
Personal
Computer
3-34
Brightness
Box
CAMERA
BODY
Power
Source