Canon PowerShot S400 Service Manual page 78

8 When the message on the right appears go to 9.
9 1. Remove the ND-2 Filter.
2. Attach the two W-10 Filters between the Lens
and the Color Viewer.
Place the camera so that the lens is set against
the center part of the Color Viewer.
3. Click the "ADJUST" button.
10 When the message on the right appears go to 11.
11 1. Remove the two W-10 Filters.
2. Attach the C-12 and FL-W Filter between the
Lens and the Color Viewer.
Place the camera so that the lens is set against
the center part of the Color Viewer.
3. Click the "ADJUST" button.
CHAPTER 3. REPAIR INSTRUCTION
Color Viewer
Personal
Computer
C-12 Filter
Color Viewer
Personal
Computer
3-31
W-10
Filter
CAMERA
BODY
Power
Source
Stand
FL-W Filter
CAMERA
BODY
Power
Source
Stand