Preparation - Canon PowerShot S400 Service Manual

3.3.4 Preparation

Before starting up the Adjustment Software, follow the preparatory steps below:
1. Obtain all the tools necessary for the adjustment.
2. For the Optical Unit Adjustment, jot down the color drawn (Black or Red) on tne flat cable of the
Optical Unit. You will need it later.
3. Connect the Camera to the Power Source with the Compact Power Adapter CA-PS500, AC Cable & DC
Coupler DR-500.
4. Set the Replay Mode on the camera and turn on.
5. Set the Communication Mode to Normal.
Compact Power Adapter
6. Connect the Camera's Digital terminal to the PC's USB Port with INTERFACE CABLE IFC-300 PCU.
7. Turn on the camera.
Note: Perform the preparation in the following order otherwise the camera won't work properly.
Personal Computer
CAMERA BODY
CA-PS500
3-27
CHAPTER 3. REPAIR INSTRUCTION
USB
DIGITAL