Honeywell VISIONPRO 68-0287-04 User Manual page 32

®
VISIONPRO IAQ TOTAL HOME COMFORT SYSTEM
5. Press the Reset key to activate the new number of days
selected in the previous screen.
MON TUE WED
CHANGE FILTER UV LAMP HUMIDIFIER PAD
RESET
SCHED SCHED HOLD HOLD
DONE EDIT WAKE
6. Press the Done key to return to the Home screen.
Humidifier Pad Reminder
The Humidifier Pad change reminder must be turned on from
the Installer Setup. Once expired, the screen flashes, "Change
Humidifier Pad" and a Reset key appears. Press the Reset key
to reset the change reminder.
The remaining calendar or run time days can be viewed by
pressing the More key. The remaining days can be edited
using the More key or from the Installer Setup.
MON TUE WED
CHANGE FILTER UV LAMP
RESET
SCHED SCHED HOLD HOLD
DONE EDIT WAKE
To view or reset the reminder before it expires, follow these
steps using the More key:
1. Press the More key until the Humidifier Pad change
reminder appears on the screen. This is the number of
calendar days remaining on the Humidifier Pad reminder.
2. Press the Edit key.
3. Use the Up and Down keys to change the number of cal-
endar or run time days.
4. Press the Done key to go back to the viewing screen.
5. Press the Reset key to activate the new number of days
selected in the previous screen.
6. Press the Done key to return to the Home Screen.
UV Lamp Reminder
The UV Lamp change reminder must be turned on from the
Installer Setup. Once expired, the screen flashes, "Change UV
Lamp" and a Reset key appears. Press the Reset key to reset
the change reminder.
The remaining calendar days can be viewed by pressing the
More key.
68-0287—04
THU FRI SAT SUN
DAYS
CLOCK SCREEN MORE
LEAVE RETURN SLEEP CANCEL
M22451
THU FRI SA SUN
HUMIDIFIER PAD
DAYS
CLOCK SCREEN MORE
LEAVE RETURN SLEEP CANCEL
M23516
NOTE: While the reminder is set according to calendar days,
the display shows the equivalent run time days.
MON TUE
CHANGE FILTER
RESET
SCHED SCHED
DONE EDIT
The remaining days can be edited using the More key or from
the Installer Setup. To view or reset the reminder before it
expires, follow these steps using the More key:
1. Press the More key until the UV Lamp change reminder
appears on the screen. This is the number of run time
days remaining on the UV Lamp reminder.
2. Press the Edit key.
3. Use the Up and Down keys to change the number of cal-
endar days.
4. Press the Done key to go back to the viewing screen.
5. Press the Reset key to activate the new number of days
selected in the previous screen.
6. Press the Done key to return to the Home Screen.
Temperature Recovery
The thermostat feature, Adaptive Intelligent Recovery™,
eliminates all guesswork when setting the thermostat schedule.
Simply set the program schedule to the time that the comfort
temperature is desired. The thermostat then turns on the
heating or cooling at just the right time to have the home reach
the scheduled temperature at the scheduled time.
For example—get up at 6:00 AM and want the temperature to
be 70°F. Set the Wake period for 6:00 AM and 70°F. The
thermostat then turns on the heat before 6:00 AM to raise the
temperature to 70°F by 6:00 AM.
The thermostat alerts that the heating or cooling system is
coming on before a scheduled time by showing "Recovery" on
the screen.
TUE
FAN
Inside
AUTO
SYSTEM
HEAT
SCHED
32
WED THU FRI SA SUN
UV LAMP HUMIDIFIER PAD
DAYS
HOLD HOLD CLOCK SCREEN MORE
WAKE LEAVE RETURN SLEEP CANCEL
M23517
Set To
Following
Schedule
Recovery
PM
Humidity
HOLD CLOCK SCREEN MORE
M23512