Filter Change Reminder - Honeywell VISIONPRO 68-0287-04 User Manual

Iaq total home comfort system
Table of Contents

Advertisement

1. Press MORE until the dehumidifier screen is displayed.
2. Press the Up or Down arrow to set the desired humidity
level and operation (Auto or Off).
3. Press DONE to save and exit, or press CANCEL to exit
without saving changes.
Ventilation Control
You can ventilate your home at any time:
1. Press MORE until the ventilation screen is displayed.
2. Press the Up or Down arrow to set the ventilation timer.
You can set the timer to ventilate from 20 to 180 minutes,
in 20-minute increments. To turn off the ventilator, select
0.
3. Press DONE to save and exit, or press CANCEL to exit
without saving changes.
If programmed for auto-ventilation by the installer, the
thermostat will ventilate your home as needed.
Indoor Air Quality Reminders

Filter Change Reminder

The filter change reminder must be turned on from the Installer
Setup. Once expired, the screen flashes, "Change Filter" and a
Reset key appears. Press the Reset key to reset the change
reminder. The installer can configure the Filter Change
Reminder to display remaining run-time or calendar days.
MON
MON
TUE
WED
WED
OK TO PICK MULTIPLE DAYS SCREEN LOCKED
CHANGE
FILTER
UV LAMP HUMIDIFIER PAD
FAN
Inside
AUTO
SYSTEM
RESET
HEAT
PM
SCHED
HOLD
NOTE: When using run-time days, the days are counted as
fan run time, so anytime the fan is running, the
reminder is counting that time against the number of
days selected.
The remaining days can be viewed by pressing the More key;
the remaining days can be edited using the More key or from
the Installer Setup. To view or reset the reminder before it
expires, follow these steps using the More key:
THU
THU
FRI
FRI
S S A A
SUN
Set To
Following
Schedule
Humidity
CLOCK
SCREEN
MORE
M23511
VISIONPRO
1. Press the More key until the filter reminder appears on
the screen. This is the number of fan run-time or calen-
dar days remaining on the filter reminder.
MON
TUE
CHANGE
RESET
SCHED
SCHED
DONE
EDIT
2. Press the Edit key.
3. Use the Up and Down keys to change the number of run-
time or calendar days.
MON
TUE
CHANGE
SCHED
SCHED
DONE
4. Press the Done key to go back to the viewing screen.
MON
TUE
CHANGE
RESET
SCHED
SCHED
DONE
EDIT
31
®
IAQ TOTAL HOME COMFORT SYSTEM
WED
THU
FRI
SAT
FILTER
UV LAMP HUMIDIFIER PAD
DAYS
HOLD
HOLD
CLOCK SCREEN
MORE
WAKE
LEAVE
RETURN
SLEEP
WED
THU
FRI
SAT
FILTER
UV LAMP HUMIDIFIER PAD
DAYS
HOLD
HOLD
CLOCK SCREEN
WAKE
LEAVE
RETURN
SLEEP
WED
THU
FRI
SAT
FILTER
UV LAMP HUMIDIFIER PAD
DAYS
HOLD
HOLD
CLOCK SCREEN
MORE
WAKE
LEAVE
RETURN
SLEEP
SUN
CANCEL
M22449
SUN
CANCEL
M22450
SUN
CANCEL
M22449
68-0287—04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visionpro

Table of Contents