Eas Deactivation - Honeywell OrbitCG MS7180 Installation And User Manual

I
NSTALLATION

EAS Deactivation

SW1 and SW2 are the switch banks inside the Checkpoint Device that set the
deactivation range. The following is a list of Checkpoint recommended switch
bank settings.
Checkpoint Recommended Switch Bank Settings
Switch 1, 2, 3, 4 & 6
Switch 2 & 3
Switch 1, 4, 5 & 6
All OrbitCG models are equipped with EAS capabilities. OrbitCG's optional EAS
cable is equipped with additional wires for connection to a Checkpoint Device.
Figure 15 shows the location of the EAS
deactivation area for OrbitCG.
It is important to pass the entire tag through
this area to deactivate the security tag.
12
SW1
RS232, Keyboard Wedge, & RS485
Switch 5
Figure 14. EAS Cable
ON Switch 5
OFF Switch 1, 2, 3, 4 & 6
USB
ON Switch 2 & 3
OFF Switch 1, 4, 5 & 6
Figure 15. EAS Deactivation Area
SW2
ON
OFF
ON
OFF