Design Specifications - Honeywell OrbitCG MS7180 Installation And User Manual

D S
ESIGN PECIFICATIONS
Operational
Light Source:
Laser Power:
Normal Depth of Field:
Reduced Depth of Field:
Scan Speed:
No. of Scan Lines:
Motor Speed:
Min Bar Width:
Decode Capability:
System Interfaces:
Print Contrast:
No. Characters Read:
Beeper Operation:
Indicators (LED):
Mechanical
Weight:
Orb Tilt:
Specifications are subject to change without notice.
Visible Laser Diode (VLD) @ 650 nm
Less than 1 mW average
0 mm - 275 mm (0" – 10.8")
0 mm - 190 mm (0" – 7.5")
1120 scan lines per second
20
3360 RPM
0.13 mm (5.0 mil)
All standard 1-D bar codes including GS1 DataBar,
GS1 DataBar-Expanded, and GS1 DataBar Limited
RS232, Keyboard Wedge, Stand-Alone Keyboard, Light Pen
Emulation, RS485, USB (low speed and full speed)
35% minimum reflectance difference
Up to 80 data characters
Maximum number will vary based on symbology and density.
7 tones or no beep
Blue = laser on, ready to scan
White = good read, decoding
Width: Base - 102 mm (4.0")
Depth : 105 mm (4.1")
Height: 150 mm (5.9")
14.5 oz (410 g)
30° Vertical
MS7180
Orb - 80 mm (3.1")
0.33 mm (13 mil)
bar code
27