4.1 Overview
This chapter discusses the server configuration items for IQeye cameras, such as web and FTP
settings, which enable you to specify how the camera operates during TCP/IP connections.
Adjust the server configuration items using the browser-based Server Settings page. To access
the Server Settings page, either select Server Settings from the navigational pull-down menu
located on the View Images page, or click the Server tab that appears in the settings menu:
After you make your selection, the Server Settings page appears. Your page should look similar
to the following:
Note:
4: Server Configuration
If you are not logged into the camera, you must provide the correct
management username and password to access this page.
server configuration
40