Related Manuals for Iqinvision IQeye 4 Series
Summary of Contents for Iqinvision IQeye 4 Series
- Page 1 IQeye 4 Series Dome ™ Part of the IQeye Basic Line of Network Surveillance Products Installation & Operating Instructions IQinVision ® When you can’t afford to miss a thing.
-
Page 2: Table Of Contents
Contents 1 SERVICE ......3 2 UNPACKING ......3 3 DESCRIPTION . -
Page 3: Service
Fax: +1-949-369-8105 2. Unpacking Your IQeye 4 Series Dome should include the following: 1. IQeye 4 Series Dome Camera with black trim ring 2. Additional trim ring in beige 3. IQeye 4 Series Dome Installation and Operating Instructions 4. Mini-CD with IQeye PC Tools 5. - Page 4 NOTE: A. If you’ve ordered the optional IQeye 4 Series Dome IQD4-WB (black) or IQD4-WG (beige) Wall Mount Adapter, your pack- age should include the following: 1. Wall Mount Adapter 2. Qty (2) Screws 3. Installation & Operating Instructions B. If you’ve ordered the optional 4 Series Dome IQD4-PB...
-
Page 5: Description
The IQeye 4 Series Dome comes with a black trim plate installed, and also includes an extra trim ring in beige so that your camera will look attractive in any décor. -
Page 6: Mounting Options
5. Mounting Options The IQeye 4 Series Dome is designed to be used in one of the following configurations: a. Surface mounted to any interior durable surface wall. b. Surface mounted to a plenum or other durable ceiling surface. c. Mounted to the IQeye 4 Series single-gang box Wall Mount Adapter (P/N IQD4-WB or IQD4-WG). -
Page 7: Surface Wall Mount
6. Mounting on to an Interior Durable Surface Wall a. Remove the camera trim cover by pressing the mounting clips with the supplied trim cover removal tool. Then pivot the trim cover up and away from the camera base as shown in Image 4.1 Image 4.1 b. - Page 8 Mount the IQeye 4 Series Dome camera base to the desired wall or ceiling surface using the supplied or equivalent mount- ing hardware. d. Remove the camera shroud by plac- ing your palm over the top of the shroud, then gently squeezing the...
-
Page 9: Single-Gang Wall Mount
The IQeye 4 Series Dome Single-Gang Wall Mount Adapter is designed to easily wall-mount your dome camera on any single- gang electrical box, or to configure your IQeye 4 Series Dome so that the dome is pointed downward. A. Pull your PoE Ethernet cable through the back slot of the Wall Mount as shown in Image 4.5, and attach the Wall... -
Page 10: Pendant Mount
D. Setup the camera as described in step 6. 8. IQeye 4 Series Dome Pendant Mount Installation The IQeye 4 Series Dome Single-Gang Pendant Mount Adapter is designed to easily mount your 4 Series Dome via a ¾" NPT con- duit (not supplied). -
Page 11: Pc Configuration
D. Setup the camera as described in steps D-H in section #6. NOTE: The IQeye 4 Series Dome Pendant Mount does not provide a weather seal to the camera. The IQeye 4 Series Dome in all of its mount- ing configurations is still an interior camera. - Page 12 4. Click the “Scan for IQeye cameras on my network” button to find IQeye cameras. The detected cameras will be displayed in the IQfinder win- dow. Highlight a camera from the list and click the “Edit” button to edit the selected camera’s IP settings. 5.
- Page 13 Note: The default username is “root” and the default pass- word is “system”. For further information see the IQeye documentation on the installation CD or at http://www.iqeye.com. IQinVision, Inc. 33122 Valle Road San Juan Capistrano, CA 92675-4853 USA Part Number: 901-0093 Rev A...
-
Page 14: Warranty Information
This warranty does not apply (a) to faulty and improper installation, maintenance, service, repair and/or alteration in any way that is not contemplated in the documentation for the product or carried out with IQinVision’s consent in writ- ing, operational adjustments covered in the operating manual for the product or normal maintenance, (b) to cosmetic...