Table of Contents
Advertisement
[COLD RESET]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Press the three buttons
x
simultaneously.
2. The fluorescent indicator tube becomes blank for a while, and
the set is reset, then becomes demonstration mode.
[VERSION DISPLAY]
• This mode is used to check the model and software version.
Procedure:
1. Press the
button to turn the power ON.
I/1
2. Press two buttons of
x
seconds. The model name is displayed, then the software
version is displayed.
[LCD TEST]
• This mode is used to check the liquid crystal display.
Procedure:
1. Press three buttons of
x
simultaneously.
2. All segments of liquid crystal display are turned ON.
3. To release from this mode, press the
[TUNER TEST]
• This mode is used to check the change of frequency.
Procedure:
1. Press three buttons of
x
simultaneously.
2. The message "TUN TEST" is displayed on the liquid crystal
display.
3. Each time
button is pressed, the display changes preset
Y
FM frequency.
[TUNER/BAND]
4. Press the
5. Each time
button is pressed, the display changes preset
Y
AM frequency.
[AMP TEST]
• This mode is used to check the function of the amplifier.
Procedure:
1. Press three buttons of
simultaneously.
2. The message "AMP TEST" is displayed on the liquid crystal
display.
[VOLUME]
3. When the
knob is turned clockwise, the message
"VOLUME MAX" is displayed on the liquid crystal display.
[VOLUME]
When the
knob is turned counterclockwise. The
message "VOLUME 0" is displayed on the liquid crystal
display.
[BASE]
[TREBLE/MIDDLE]
4. Each time the
or
the message "EQ MAX", "EQ MIN" or "EQ FLAT" is
displayed in this order on the liquid crystal display.
[USB TEST]
• This mode is used to display the status of comunication.
Procedure:
1. Press the
button to turn the power ON.
I/1
[FUNCTION]
2. Press the
button to select "USB".
3. Press three buttons of
x
simultaneously.
4. The message "WINAMP3" is displayed on the liquid crystal
display at first.
SECTION 5
TEST MODE
[ENTER]
[FUNCTION]
,
, and
and
simultaneously for five
I/1
[MODE]
[FUNCTION]
,
, and
button.
I/1
[MODE]
[TUNER/BAND]
,
, and
button to set AM.
[MODE]
[i-Bass]
x
,
, and
knob is turned,
[PLAY MODE]
[i-Bass]
,
, and
[ROBBERY PREVENTION LOCK]
• This mode is used to unable to take sample disc out of set in the
shop.
Procedure:
1. Press the
button to turn the power ON.
I/1
[FUNCTION]
2. Press the
button to select "DVD".
[ENTER]
3. Press two buttons of
seconds.
4. The message "LOCKED" is displayed on the liquid crystal
display and the disc is locked. (Even if pressing the Z button,
the message "LOCKED" is displayed on the liquid crystal
display and the disc is locked)
5. To release from this mode, press two buttons of
and Z simultaneously for five seconds again.
6. The message "UNLOCKED" is displayed on the liquid crystal
display and the disc is unlocked.
[SHIP MODE]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the
button to turn the power ON.
I/1
[FUNCTION]
2. Press the
button to select "DVD".
3. Press the
button for five seconds.
x
4. The message "MECHA LOCK" is displayed on the liquid crystal
display and the ship mode is set, then becomes power off.
[DECK TEST]
• This mode is used to check the tape deck operation.
Procedure:
1. Press the
button to turn the power ON.
I/1
2. Press three buttons of
simultaneously.
3. The message "TC TEST" is displayed on the liquid crystal
display.
4. Press the
z
button to start recording.
5. When the
x
button is pressed during recording, the tape is
rewound back to the beginning of recording, then playback starts.
[REPEAT 5 TIMES CANCEL]
• The number of repeat for DVD playback is 5 times when the
repeat mode is "REPEAT". This mode enables DVD to repeat
playback for limitless times.
Procedure:
1. Press the
button to turn the power ON.
I/1
[FUNCTION]
2. Press the
button to select "DVD".
3. Press three buttons of
x
simultaneously.
4. Repeat 5 times limit is canceled.
[AM STEP CHANGE-OVER]
(Except Saudi Arabia model)
• A step of AM channels can be changed over between 9 kHz and
10 kHz.
Procedure:
1. Press the
button to turn the power ON.
I/1
[FUNCTION]
2. Press the
button to select "TUNER".
[TUNER/BAND]
3. Press two buttons of
CX-BK7
and Z simultaneously for five
[ENTER]
[MODE]
[FUNCTION]
,
, and
z
[PLAY MODE]
[FUNCTION]
,
, and
and
simultaneously.
I/1
27
Hide quick links:
Advertisement
Table of Contents
