Test Mode - Aiwa CX-VX5 Service Manual

[Version Display Mode]
* The software version is displayed.
Procedure:
Press three buttons of X , [PRESET +] and [FUNCTION]
1.
simultaneously for two seconds.
2. The message "MODEL NAME & AREA" is displayed. The
version display mode is activated.
Press the [DISPLAY] button. "STR ***" is displayed.
3.
Each time the [DISPLAY] button is pressed, the display changes
4.
in the order of DVD, MODEL NAME & AREA and STR.
To exit from this mode, press the ?/1 button.
5.
[Key Test Mode]
* Button check
Procedure:
Press three buttons of x , [FUNCTION] and Z simultaneously.
1.
2. The message "KEY00 V.OL" is displayed.
3. Each time a button is pressed, "KEY00 V.OL" value increases.
However, once a button is pressed, it is no longer taken into
account.
4. When all buttons are pressed, "KEY12 V.OL" appears and the
number blinking is stopped.
5. To exit from this mode, disconnect the power cord.
[Display Test Mode]
Procedure:
Press three buttons of X , [PRESET --] and [FUNCTION]
1.
simultaneously.
2. All segments are turned on.
TRK CHAP ID3
SLEEP TITLE
D D
D NTSC VF
D D
PL
BASS NIGHT
Press the [DISPLAY] button, all segments are turned off.
3.
When the [DISPLAY] button is pressed, the display will light
4.
up as follows.
TITLE CHAP
NTSC
D D PL
NIGHT
Press the [DISPLAY] button and confirm the display.
5.
SLEEP TRK ID3
D D D
VF
BASS
Every pressing of the [DISPLAY] button turns on each segments
6.
in the same order.
7. To exit from this mode, press the ?/1 button.
SECTION 4

TEST MODE

ALBM H MONO M S DVD SACD PBC
VCD MP3TUNED
kHz SHUF PGM
MHz ALBM
DVD
ALBM MONO
V
H M S
CD
kHz
MHz
[OSD Test Mode]
Procedure:
1. Press the ?/1 button on the main unit or the ?/1 button on
the remote commander to turn the set on.
Press two buttons of Z , x and turn the [VOLUME] control
2.
clockwise simultaneously.
3. The message "SERVICE IN" is displayed on the display. The
Test Mode Menu is displayed on the TV screen.
4. To execute each function, select the number on the remote
commander.
5. See the following section for explanation in detail.
To exit from this mode, press the ?/1 button.
6.
[Disc Slot Lock]
The disc slot lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure:
1. Turn the set on.
Press two buttons of x and Z simultaneously for five seconds.
2.
3. The message "LOCKED" is displayed and the slot is locked.
Releasing Procedure:
1. Press two buttons of x and Z simultaneously for five seconds
again.
2. The message "UNLOCKED" is displayed and the slot is
unlocked.
Note : When "LOCKED" is displayed, the slot lock is not released
by turning power on/off with the ?/1 button.
[Repeat Limit Release Mode]
Procedure:
Press three buttons of x , [PRESET +] and [FUNCTION]
1.
simultaneously.
2. Repeat limit is released.
1
PBC
MP3
SHUF
ALBM 1
SACD
TUNED
PGM
CX-VX5
27