Timing Belt (Front/Rear); Cam (Gear) - Aiwa CX-BK7 Service Manual

CX-BK7

3-22. TIMING BELT (FRONT/REAR)

5 two gears
(center)
6 timing belt
(front)
4 gear
(timing)

3-23. CAM (GEAR)

qf cam (gear)
: Note
qd screw
qs gear(mode cam)
Note: Refer to assembly
(Section 4).
20
3 slider (mode cam) assy
7 two gears (center)
8 timing belt (rear)
9 timing belt (rear)
2 gear (mode cam)
: Note
1 screw
(PTPWH2.6 × 8)
qa screw
(PTPWH2.6 × 8)
0 gear (mode C)
:Note
9 screw
(PTPWH2.6 × 8)
When install three timing belts,
its pass under each claws.
timing belt
(rear)
timing belt
(rear)
Note: Refer to assembly (Section 4)
4 gear (mode 5)
3 screw (PTPWH2.6 × 8)
2 pulley
1 screw(PTPWH2.6 × 8)
8 gear (mode D)
7 screw (PTPWH2.6 × 8)
claw
claw
claw
claw
timing belt (front)
6 gear (mode 5)
5 screw (PTPWH2.6 × 8)
(mode deceleration)