Sharp AL-1661CS Service Manual page 99

Main Sub
Contents
code code
48 01 Main scan/sub scan
direction magnification ratio
(COPY MAG.)
05 SPF/RSPF mode sub scan
direction magnification ratio
in copying (SPF/RSPF
MAG.)
[Function]
Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direction.
Enter the adjustment value with [10KEY]. Press [START] key to save the set value and make a copy.
(When the adjustment value is increased by 1, the magnification ratio is increased by 0.1%.)
The adjustment mode can be changed by pressing [ / ] key. (Adjustment range: 1 – 99, Default: 50)
Mode
Main scan direction magnification ratio
OC mode sub scan direction
magnification ratio
[Operation]
The operation is similar to test command 46-01.
[Function]
Used to display the current SPF/RSPF mode sub scan direction magnification ratio on the LCD.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a copy
is made. (When the set value is increased by 1, the magnification ratio is increased by 0.1%.)
(Adjustment range: 1 – 99, Default: 50)
When adjusting the RSPF, use [2-SIDED COPY] key to select single/duplex after entering the one
page print mode, performing 2-page single copy.
For printing, regardless of the density mode and the density level,
Density mode = MANUAL
Density level = 3
Sub scan magnification ratio adjustment on the
surface of SPF/RSPF document
Sub scan magnification ratio adjustment on the
surface of RSPF document *1
When there is no document in SPF, copy is inhibited.
*1: Only when RSPF is installed. If installed, skipped.
[Operation]
The operation is similar to test command 46-01.
AL-1661CS TEST COMMAND, FAX SOFT SWITCH, TROUBLE CODES 10 - 23
Details of function/operation
Display item
F-R
SCAN
Mode Display item
Default value LED
50 PRINT mode lamp
50 SCAN mode lamp
Default LED
SIDE1 50 COPY mode lamp
SIDE2 50 PRINT mode lamp