Functional Specificaion Of The Shortcut Key - Pioneer XV-HTD530 Service Manual

1

7.1.3 FUNCTIONAL SPECIFICAION OF THE SHORTCUT KEY

Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC
key of the remote control unit. To quit, press the ESC key
A
Command Contents
Memory clear and resion / revision indication
Average value measurement of DVD error rate
CD error rate measurement
Aspect : Pan scan
Aspect : Letter box
Aspect : Wide
Digital : AC3
Digital : AC-3 > PCM
B
Virtual surround : OFF
Virtual surround : TruSurround
Digital output ON
Digital output OFF
DTS Digital output ON
DTS Digtal output OFF
Scart terminal output : VIDEO
Scart terminal output : S-VIDEO
Scart terminal output : RGB
Progressive OFF
C
Progressive ON
Audio 5.1 CH ON
FL indication of EDC / ID error
FL indication of ID number
ZOOM ON (X4)
ZOOM OFF
Service mode indication (error rate indication, etc.)
Model information indication
Background color change
Audio last stage mute ON
D
Audio last stage mute OFF
Title search Input mode IN
Title No. input
Search execution
Region confimation mode
• Service mode indication (ESC + CHP/TIM keys)
ID Address
The error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs.
EDC/ID/AV 1 error history (ID Address, EDC/ID/AV 1 Error, last eight errors)
Self-diagnosis functions (If a mechanical error has occurred, the mechanical-error history is also displayed.)
• Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys)
E
The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is
displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs)
For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less
• Indication of model information (ESC + CHAP keys)
The items from 12 to 19 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to
B.E VERSION, and M is changed to F.E VERSION. For details, see 7.1.4.
• Change of the background colors (ESC + "+10" [Test mode remote control unit] keys)
Every time the keys are pressed, the background color is changed between blue and green alternately.
(The green background is used in SETUP NAVIGATOR.)
• Region confirmation mode (ESC + AUDIO [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys)
After you press the AUDIO key while holding the ESC key pressed and then input the region number, if the number is different from that set in
F
the unit, an error message is displayed, and the tray opens.
90
1
2
Conditions
Only for models having the corresponding
functions
WY, models equipped with Scart terminal
Only for progressive models
Only for models having the corresponding functions
XV-HTD530
2
3
Remote Control
Key Name
CLEAR (∗1)
5 (∗1)
5 (∗1)
2
3
4
5
6
7
8
REPEAT A
REPEAT B
STEP FWD
STEP REV
AUDIO
SUBTITLE
ANGLE
R_SKIP
F_SKIP
KD_ENTER
CX (∗1)
STEREO (∗1)
ZOOM
< X3 (∗1)
CHP/TIM (∗1)
CHAP (∗1)
+10 (∗1)
9
0
SIDE A (∗1)
Numbers (∗1)
PLAY (∗1)
AUDIO (∗1)
Numbers (∗1)
∗1 : Test mode remote control unit
3
4
Remote
Control Code
A8-45
A8-05
A8-05
AF-A2
AF-A3
AF-A4
AF-A5
AF-A6
AF-A7
AF-A8
AF-E8
AF-E4
AF-B7
AF-B8
AF-BE
AF-36
AF-B5
A3-9D
A3-9C
AF-EF
A8-0E
A8-4A
AF-37
A8-59
A8-13
A8-40
A8-1F
AF-A9
AF-A0
A8-4D
A8-00 to A8-09
A8-17
A8-1E
A8-01 to A8-08
4