Pioneer XV-HTD530 Service Manual page 128

1
How to repair when the Table Mechanism Section does not function
A
B
C
Table Mechanism Section
Table Mechanism Section
D
E
Mechanism Base Section
F
128
1
2
Bottom View
2
3
Procedures:
1. Flex the Table Mechanism Section and the Mechanism Base Section
slightly in opposite directions by pulling up on the Table Mechanism
Section and pressing down on the Mechanism Base Section.
When pressing down on the Mechanism Base Section, grip it near the
planet base.
2. Flex the Table Mechanism Section until the boss of the planet base
goes over the wall of the cam (by approx. 5 mm).
3. Set the boss of the planet base into the cam groove of the Table
Mechanism Section.
If the boss is set in this position, the unit does not operate correctly.
If the boss is set in the cam groove, the unit operates correctly.
Cam groove
Planet Base
Boss part
XV-HTD530
3
4
4