Installation - Kenmore 970R7030 Series Use & Care Manual

Installation

Tools Necessary:
Phillips Head
or
#2 Square
Drive Head
Socket
Wrench Set
This Use & Care Guide provides general
installation and operating instructions for
your model. We recommend using a service
or kitchen contracting professional to install
your refrigerator. Use the refrigerator only
as instructed in this Use & Care Guide.
Before starting the refrigerator, follow these
important first steps.
Location
• Choose a place that is near a grounded,
non-GFCI, electrical outlet. Do Not use an
extension cord or an adapter plug.
• If possible, place the refrigerator out of
direct sunlight and away from the range,
dishwasher, or other heat sources.
• The refrigerator must be installed on a
floor that is level and strong enough to
support a fully loaded refrigerator.
• Consider water supply availability for
models equipped with an automatic ice
maker.
(OR)
or
Installation
• Allow the following clearances for ease
9
Components Provided:
Top Hinge
Cover Front
Screw
Top
Hinge
Screw
Adjustable
Wrench
or
CAUTION
Do not install the refrigerator where the
temperature will drop below 55°F (13°C) or
rise above 110°F (43°C). The compressor
will not be able to maintain proper
temperatures inside the refrigerator.
Do not block the toe grille on the lower
front of your refrigerator. Sufficient air
circulation is essential for the proper
operation of your refrigerator.
of installation, proper air circulation, and
plumbing and electrical connections:
Sides & Top
Back
NOTE
If your refrigerator is placed with the door
hinge side against a wall, you may have to
allow additional space so the door can be
opened wider.
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw
3/8" Fixed
Wrench
⅜" (9.5 mm)
1" (25.4 mm)