Product Installation - Kenmore KKUF07 Use & Care Manual

PRODUCT INSTALLATION

Install Instruction
Finding a suitable location
• This freezer is designed to be free standing only, and should not be recessed or
built-in.
• The freezer should be placed in a well-ventilated indoor place; the ground shall be
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or
watery places to prevent rust or reduction of insulating effect.
Dimensions and Clearances
• Too small of a distance from adjacent items may result in the degradation of
freezing capability and increased electricity costs. Allow over 100 mm of clearance
from each adjacent wall when installing the appliance.
Providing a proper power supply
• Check your local power source. This freezer requires a
supply.
• Use a receptacle that accepts the grounding prong. The power cord is equipped
with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding)
wall outlet to minimize the possibility of electric shock hazard from this freezer.
CAUTION
The freezer should always be plugged into its own individual electrical outlet which
has a voltage rating that matches the rating plate.
Never unplug your freezer by pulling on the power cord. Always grip the plug
Start to use
• The freezer shall stay in an upright position for half an hour before connecting
• The freezer shall run 2 to 3 hours before loading fresh or frozen foods; the freezer
shall run for more than 4 hours in summer in advance considering that the ambient
temperature is high.
AC115 V, 60 Hz
9
power