Frus By Alphabetic Listing - InFocus LP340B Service Manual

FRUs by alphabetic listing

Below is an alphabetically arranged list of FRUs used in the LP340/350.
Part Name Projector Part Number Notes
Blower, lamp All
Bottom case LP340,
LP350
Bottom case LP340B
Chassis All
Controller ECA LP350
Controller ECA LP340
Controller ECA LP340B
DMD cap All
DMD mounting kit All
DMD elastomer kit All
Fan, 80 mm lamp All
Fan, 60 mm All
Elevator kit All
Fastener kit All
Focus ring All
Front bezel All
I/O EMI shield LP340,
LP350
LP340 / LP350 Service Guide
526-0056-xx Also included with new optical engine and new lamp
housing.
505-0635-xx Includes the elevator assembly. Requires a certification
label, and product label.
505-0928-xx Includes the elevator assembly. Requires a certification
label, and product label.
330-0602-xx
510-1485-xx The 1485 and 1524 controllers are identical.
or
When installing a new controller ECA, you must check and
510-1524-xx
adjust the DMD bias setting. See Updating the DMD bias
setting for instructions.
510-1508-xx The 1508 and 1523 controllers are identical.
When installing a new controller ECA, you must check and
adjust the DMD bias setting. See Updating the DMD bias
setting for instructions.
510-1573-xx When installing a new controller ECA, you must check and
adjust the DMD bias setting. See Updating the DMD bias
setting for instructions.
340-0601-xx Plastic cover with Velcro strap used to secure DMD to
engine housing when removing the engine.
505-0778-xx Includes DMD heat sink, DMD stiffener, 2 DMD EMI
shields, DMD stiffener insulator, and fasteners.
505-0779-xx Includes 2 elastomers, DMD retainers, and DMD carriers.
526-0058-xx Fastens to the lamp housing. Also included with new
optical engine and with new lamp housing.
526-0057-xx Fastens to the speaker/fan bracket.
505-0076-xx Includes elevator shaft, actuator and spring. Included in a
new bottom case.
802-0023-xx Includes 10 of each fastener used to fasten FRUs.
505-0640-xx
505-0636-xx Includes the IR lens.
330-0604-xx
108