Software Upgrade And Dmd Bias Adjustment; Upgrading The System Software For The Lp350, Lp340 And Lp340B - InFocus LP340B Service Manual

Software Upgrade and DMD Bias
Adjustment
This section shows you how to upgrade the system, boot and splash screen software for the
LP340 and LP340B.
You'll also find out how to check and adjust the DMD bias setting on the controller ECA. You must check
the bias setting whenever you replace an optical engine or controller ECA.

Upgrading the System Software for the LP350, LP340 and LP340B

To upgrade the software on the projector, you need to do the following:
Download the software from the InFocus web site.
Load the software on your computer
Connect the computer and projector
Install (flash) the software on the projector
Downloading the Software to your Computer
1 In the Projector Software page, click the software version link.
The File Download dialog box appears.
2 In the File Download box, select Save This Program To Disk option, then click OK.
LP340/340B/350 Service Manual
LP350,
68