Fasteners - InFocus LP340B Service Manual

Fasteners

The fastener kit (802-0023-xx) contains a selection of each of the fasteners listed below. Torque settings
for each fastener are listed in the parts replacement procedures.
Size
M3x8 TORX SEM
M3x10 Phillips SEM
M3x8 Black TORX
M2.6x8 PHP
M3x8 TORX SQ Cone, SEM
6-32x3/8 PHP Zinc
Jack screws
M3x20 TORX
M3x12 TORX
LP340/340B/350 Service Manual
Used in
Keypad to top case (2); speaker/fan assembly (1); power supply to
chassis (9); optical engine to top case (2); controller ECA to chassis
(7)
DMD stiffener and spring shields to controller ECA (4)
Bottom case to chassis (5); front bezel to chassis (1); rear bezel to
chassis (1)
I/O shield to controller ECA at CableWizard connector (2)
Lamp housing to optical engine (2)
DMD heat sink to heat spreader (2)
I/O shield to controller ECA at M1 connector (2)
60mm lamp fan to lamp housing (2); lamp blower to lamp housing (2)
lamp blower bracket to lamp housing (1)
67