Set The Current Day And Time - Honeywell MAGIC STAT MS3000 Owner's Manual

To set the first temperature program, press and
hold until the display shows the temperature you want
when you wake up during the heating season (72°
Heat shown) .Youcan backup bytapping thekey.
The LEFT temperature set point indicator should be stopped
under the heating temperature you desire when you wake up, with 'M
a maximum of 80° F,
If you have air conditioning, press and hold until
the display shows the temperature you want when
you wake up during cooling season (76° shown). You
or greater difference between heat and cool tempera-
ture settings.
The RIGHT temperature set point indicator should be stopped under the cooling temperature
you desire when you wake up, with a minimum of 62° F.
To set additional program times and temperatures, repeat steps starting on lower
half of page 7 through here. First set a time, then enter heating and cooling tem-
peratures desired at that time.
You must set at least one more time/temperature schedule, and may set up to a total of 6 per
day. They must beat least 30 minutes apart.
After programming is complete, hoId to lock in
place. It is now copied into all 7 days of the. week. If
M o d e
page 15.
STEP 2
SET THE CURRENT DAY AND TfME
Now you will set the current day and time of day.
Press until the display looks like this.
Mode
Press until you reach the correct day (Wednesday
shown) and approximately the correct time, within 4
increments, tap the key to back up. )
TEMPERATURE SET POINT INDICATORS
60 70 80 90
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 I I
m m m m n m
S M T W T F S
TEMPERATURE SET POINT INDICATORS
60 70 80 90
1111111111
6 :~
AM
m m m u m m
S M T W T F S
8
s e e
AM
60 70 80 90
1111111111111111111
AM
60 70 80 90
1111111111111111111
S M T
WEDNESDAY SHOWN'
10
m w
P R O G R A M
1111111
m
60 70 80 90
SET CLOCK
69-8026—2
sET CLOCK
SET CLOCK
PM
T F S
/