This guide can be used for programming your new thermostat.
NOTE: Batteries are required for operation and programming. When inserting batteries, set
system switch to OFF. Remove the battery door (on the thermostat left side) using a coin
at the bottom. Follow instructions on pages 8 and 9.
Set Current Time/Day
To set the time, press and release
the day,
press and release
Clock/Day
Heating Program
With system switch at HEAT, press and release
the display.
Set
Clock/Day
Set
again, then press
Time
Ahead
once, then press
Time
Ahead
until current day shows; then press
Back
M1699A
Weekday
once. WAKE, Mon-Fri and SET appear on
Schedule
14
until current time shows; to set
Back
M1699A
Run
.
Program
69-1012