Honeywell MAGIC STAT MS3000 Owner's Manual page 3

Before the thermostat is programmed, holding this key sequences through
PROGRAM and SET CLOCK. After the thermostat is programmed, holding this key
four functions include:
PROGRAM—allows you to program the heating and cooling temperature points,
at 2 to 6 different times per day, for each day of the week.
SET CLOCK—allows you to enter the current time to within 10 minutes.
HOLD—allows you to set and hold one temperature until you choose to change
it. This feature can be used only after the thermostat has been programmed. See
page 20.
HOLD UNTIL—allows you to set and hold one temperature for up to a week; it
will return to your normal schedule at a time and day you set. This feature can be
used only after the thermostat has been programmed. See page 22.
Tapping the Mode key interrupts function sequencing, and returns to display of
present room temperature.
When in SET CLOCK mode, hold key to advance clock time in 4 hour incre-
ments. To step the clock backward by 4 hour increments, tap the key.
Fast
When in PROGRAM mode, use to review entered programs. Hold key to
advance to next programmed temperature range; tap to back up.
When in SET CLOCK mode, hold key to advance clock time in 10 minute
increments. To step the clock backward by 10 minute increments, tap the key.
slow
When in PROGRAM mode, hold key to advance program time in 30 minute
increments. To step the time backward by 30 minute increments, tap the key.
AH3..LV83H1 9N111V1SNI
2
69-8026-2