Other Error Messages; Warnings - Canon PIXMA MP950 Service Manual

blinking
Alarm LED lit RAM error

2-3. Other Error Messages

Message on the LCD
Printing is unavailable. Data received via wireless
communication is not photo data.
The selected paper cannot be fed from cassette. Change
the paper source.
Cannot specify the followings together. Change one of
the settings.
Device memory is full. Cannot continue process.
Reduce the number of photos to print.
Failed to scan. Either document cannot be scanned or is
not placed on the platen glass.
Press <>.
(<>: Color button icon)
Press <>.
(<>: Black button icon)
There are no photos in memory card.
The value exceeds the number of copies you can print. During selecting images or specifying the number of copies, the
Memory card is not set. Insert the card after checking
the direction.
DPOF information is not saved in the memory card.
The number of copies to print is not set. Input the
number of copies.
This layout is available only for A4 or 8.5"x11"(LTR). In Layout print, "Mixed 1, 2, or 3" which is available only with
Settings cannot be changed when printing stickers.
Change the setting after removing the card.
The card is currently write-enabled. Set to read-only
mode before performing operation.
The paper size is not correct. Check the page size you
have set.
Failed to scan Photo Index Sheet. Check the
orientation, position and marking. <See manual>
Failed to scan handwriting sheet. Check orientation and
position, and make sure platen and sheet are clean.
<See manual>
Failed to scan. Try again.
Film scanning error. Remove FAU (Film Adapter Unit)
protective sheet.
Photo scan error. Photo size is too large. Leave at east
10mm between photos.
Perform operation after the film is scanned.

2-4. Warnings

Warning
Low ink
Print head temperature rise
[6300]
The received image data was invalid in infrared communication
from a mobile phone.
The paper type being used is not supported for paper feeding
from the cassette. (Business Card, Credit Card size paper and
Photo Stickers are not supported.)
Settings made conflict each other.
The memory is not sufficient to do the print job.
The machine failed in scanning the document for Fit-to-page
copy, or when doing pre-scanning in a photo / film, the photo /
film cannot be recognized.
The Black button was pressed, but it is invalid.
The Color button was pressed, but it is invalid.
Supported image files are not in the memory card.
total print quantity exceeds the prescribed value of 999.
No memory card is inserted in the slot.
DPOF print was selected in the menu, but no DPOF files are
contained in the memory card.
Multi-photo print was attempted without specifying the print
quantity (with the print quantity left "0" (zero)).
A4 or LTR size paper is selected, but the paper size is not set to
A4 or LTR.
With Sticker print selected, the Settings button was pressed.
With a memory card inserted in the slot, change of the
Read/Write attribute was attempted.
With the memory card set to the Write-enabled mode, Card
Direct printing operation was attempted from the menu.
Non-supported size of paper for Camera Direct (PictBridge)
printing is selected.
The machine failed in scanning the Photo Index Sheet.
The machine failed in scanning the handwriting sheet.
Scanning the film failed. Film was not set, or color /
black&white or positive / negative settings was wrong.
The lamp has insufficient illumination for scanning the film.
(The sponge frame was not removed, or the lamp has a problem.)
Although the images scanned at multi cropping was saved using
JPEG, the data size was too large. Because the gap between each
photo was too narrow, the data was detected as one image which
was too large for photo scanning.
In the photo / film mode, the print operation was attempted from
the menu screen before scanning the photo / film.
Message on the LCD
The following ink is low. Continue?
(Icon of each ink tank)
Yes No
In Camera Direct Printing, only "Yes" can be selected.
If the print head temperature does not fall, the error code "5200" is
displayed, indicating the print head temperature rise error.
The RAM error occurred in the RAM check at hard-power-on.
Cause
1-7
- Logic board ass'y
The error message is displayed for a while, then the LCD
automatically returns to the initial screen you see when the
COPY, SCAN, FILM SOURCE, or MEMORY CARD button is
pressed.
Change the paper source to the ASF.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
Reduce the amount of data to be printed, or print from a
computer.
Press the OK button to clear the error. The LCD automatically
returns to the display before the error occurrence.
A temporary error. Press the Color button to continue the
operation.
A temporary error. Press the Black button to continue the
operation.
The error message is displayed for a while, then disappears.
After the error message is displayed for a while, the last
operation before the error is cancelled, and the total print
quantity returns to the value before the error.
Set a memory card.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
The error message is displayed for a while, then disappears.
Specify the print quantity.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
Cancel printing on the digital camera.
Press the OK button to clear the error. The LCD automatically
returns to the display before the error occurrence.
Press the OK button to clear the error. The LCD automatically
returns to the display before the error occurrence.
Press the OK button to clear the error. The LCD automatically
returns to the display before the error occurrence.
Press the OK button to clear the error. The LCD automatically
returns to the display before the error occurrence.
Press the OK button to clear the error. The LCD automatically
returns to the display before the error occurrence.
The error message is displayed for a while, then the LCD
automatically returns to the display before the error occurrence.
Solution
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the LCD.
- Select No, and press the OK button.
=> Printing is cancelled, and the LCD returns to the display
immediately before printing was attempted.
When the print head temperature falls, the error is automatically cleared.
Note:
If the print head temperature exceeds the specified limit when the
Solution