List Of Error Display / Indication; Operator Call Errors - Canon PIXMA MP950 Service Manual

2. LIST OF ERROR DISPLAY / INDICATION

Errors and warnings are displayed on the LCD.
2-1. Operator Call Errors (by Alarm LED Blinking in Orange)
Error
No paper (ASF).
*1
No CD / DVD tray.
No paper in the front paper feed
cassette.
*1
No CD or DVD .
Paper jam.
Paper jam in the rear guide.
Paper jam in the under guide.
No ink.
Ink tank not installed.
The print head is not installed or it
is not properly installed.
The print head temperature sensor
error
Faulty EEPROM data of the print
head
Inner cover open before printing on
paper.
Inner cover open during printing on
paper.
Inner cover open during printing on
paper (print continuable).
Inner cover open during printing on
paper
Inner cover closed during CD /
DVD printing
Inner cover closed during CD /
DVD printing
Multiple ink tanks of the same color
installed.
Ink tank in a wrong position.
Warning: The waste ink absorber
becomes almost full.
The connected digital camera or
digital video camera does not
support Camera Direct Printing.
Automatic duplex printing cannot
be performed.
Failed in automatic print head
alignment.
Error code Message on the LCD
Auto sheet feeder.
[1000]
There is no paper. Load paper and press [OK].
[1001] There is no CD-R tray. Attach the tray and press [OK].
Cassette.
[1003]
There is no paper. Load paper and press [OK].
Printable disc is not set. Correctly place a disc in the CD-R
[1002]
tray and press [OK].
[1300] The paper is jammed. Clear the paper and press [OK].
[1303]
[1304]
Ink has run out. Replace the ink tank and close the cover.
[1600]
(U041)
The following ink tank cannot be recognized. Applicable
[1660]
ink color (U043)
[1401] Print head is not installed. Install the print head.
[1403] Error code
[1405]
(print Inner cover is open. Close the inner cover and press [OK]. Close the inner cover, and press the OK button.
continuable).
*2
[1841]
(print NOT
continuable).
*2
[1846]
(print
continuable).
*1
[1851]
(print NOT
continuable).
*1
[1856]
(print Open the inner cover, place the CD-R tray and press [OK]. Open the inner cover which functions as the CD / DVD tray feeder, set
continuable).
*1
[1850]
(print NOT
continuable).
*1
[1855]
More than one ink tank of the following color is installed.
[1681]
(U075)
[1680] Some ink tanks are not installed in place. (U072)
The waste ink absorber is almost full. Press [OK] to
[1700]
continue but early replacement recommended. <See
manual>
[2001] Incompatible device detected. Remove the device.
This paper is not compatible with duplex printing. Remove
[1310]
the paper and press [OK].
Auto head align has failed. Press [OK] and repeat
[2500]
operation. <See manual>
Set the paper in the ASF, and press the OK button.
Set the CD / DVD tray, and press the OK button.
Set the paper in the cassette, and press the OK button.
Set a CD or DVD in the CD / DVD tray (which is ejected at error
occurrence), and inset the CD / DVD tray in the proper position. Then,
press the OK button.
Remove the jammed paper, and press the OK button.
Replace the empty ink tank(s) and close the cover. When pressing the
OK button, printing can be continued though ink may run out during
printing..
Install the applicable ink tank(s) properly, and confirm that the LED's of
all the ink tanks light red.
Install the print head properly.
Handle this error by turning ON/OFF the machine. If not recovered, the
print head may have problems. Replace the print head.
Close the inner cover, and press the OK button to clear the error. The
paper being printed at error occurrence will be ejected without printing
the remaining data for the ejected paper, then printing will resume from
the next page.
Close the inner cover, and press the OK button.
Close the inner cover, and press the OK button to clear the error. The
paper being printed at error occurrence will be ejected without printing
the remaining data for the ejected paper, then printing will resume from
the next page.
the CD / DVD tray in the feeder, and press the OK button.
Open the inner cover, and press the OK button to clear the error. The
CD or DVD being printed at error occurrence will be ejected without
printing the remaining data for the ejected CD or DVD, then the next
print job will be done.
Replace the wrong ink tank(s) with the correct one(s).
Install the ink tank(s) in the correct position.
Press the OK button. The waste ink absorber full error (service call
error) may occur soon.
Remove the cable between the camera and the machine.
Press the OK button to eject the paper being used at error occurrence.
Printing will resume from on the front side of the next page. Te data of
the back of the page in printing when the error occurred is not printed.
Press the OK button.
- If paper is being fed at error occurrence, the error is indicated after the
paper is ejected.
- If the error occurs, the print head alignment values are not changed.
- After exit from the error by the OK button, the automatic print head
alignment will not be re-done.
When printing was not possible due to no ink or no ink ejection.
or, the AD value of the sensor was incorrect.
1-5
Solution