Troubleshooting - Sony TRINITRON KV-AR25M81A Service Manual

Bg3r chassis
Table of Contents

Advertisement

Troubleshooting

If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer .
Symptom
Possible cause
Snowy picture
• Connection is loose or
the cable is damaged.
• Channel presetting is
inappropriate or
incomplete.
Noisy sound
• The antenna setup is
inappropriate.
• Signal transmission is
low.
• Broadcast signals are
Distorted picture
too strong.
Noisy sound
• The TV system setting
Good picture
or channel presetting
is inappropriate or
incomplete.
Noisy sound
• The power cord,
No picture
antenna or VCR is not
connected.
• The TV is not turned
on.
No sound
Solutions
• Check the antenna cable and connection
on the TV, VCR and on the wall.
• Press SELECT until "MANUAL
PROGRAM" appears on the screen, then
preset the channel again.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Try using a booster.
• Turn off or disconnect the booster if it is
in use.
• If the sound of all the channels are noisy,
check the TV system ("TV SYS") setting,
then press AUTO PROGR to preset the
channels again.
• If the sound of some channels are noisy,
select the channel, then select the
appropriate TV system ("TV SYS").
• Check the power cord, antenna and the
VCR connections.
• Press ?/1 (power).
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
Page
4
10
9
10
4
13
12
continued
Additional Information
23

Advertisement

Table of Contents
loading

Table of Contents