Basic Connections (Connecting Cable Tv Or Antenna) - Sony KF-42WE620 Service Manual

Basic Connections (Connecting Cable TV or Antenna)

Connecting Directly
to Cable or an
Antenna
The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see A); older homes
probably have 300-ohm twin lead cable (see B); other homes may contain
both (see C).
A
VHF Only or VHF/UHF or Cable
75-ohm coaxial cable
B
VHF Only or UHF Only or VHF/UHF
300-ohm twin lead cable
Antenna connector
C
VHF and UHF
75-ohm coaxial cable
300-ohm twin lead cable
For optimum picture quality, a 75-ohm coaxial cable antenna connection
is highly recommended. Radio waves and other interference can easily
affect a 300-ohm twin lead cable, resulting in signal deterioration. If you
use a 300-ohm twin lead cable, keep it as far away as possible from the
LCD projection TV.
Do not use an indoor antenna; they are especially susceptible to radio
noise.
Installing and Connecting the LCD Projection TV
Rear of LCD projection TV
VHF/UHF
Rear of LCD projection TV
VHF/UHF
VHF/UHF
U/V Splitter
(not supplied)
Rear of LCD projection TV
29