Sony KF-42WE620 Service Manual page 225

Using the Menus
66
Option Description
4:3 Default Wide Zoom
Select the default
Screen Mode to
use for 4:3
Normal
sources.
Full
Zoom
Off
The 4:3 Default functions only when the LCD
z
projection TV receives 480i and 480p signals.
If 4:3 Default is set to anything but Off, the Wide Mode
z
setting changes only for the current channel. When
you change channels (or inputs), Wide Mode is
automatically replaced with the 4:3 Default setting. To
retain the current Wide Mode setting as channels and
inputs are changed, set 4:3 Default to Off.
Vertical Center Adjust
Vertical Size Adjust
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Select to continue using the current screen
mode setting when the channel or input is
changed.
Allows you to move the position of the picture
up and down in the window. (Available only in
Wide Zoom and Zoom modes.)
Press V or v and press
position between +25 and -25 (Zoom mode),
and +10 and –10 (Wide Zoom mode).
Allows you to adjust the vertical size of the
picture. (Available only in Wide Zoom and
Zoom modes.)
Press V or v and press
correction between +7 and -7.
to choose a
to choose a