Basic Connections (Connecting Cable Tv Or Antenna) - Sony KP 53HS20 Operating Instructions Manual

Installing and Connecting the Projection TV

Basic Connections (Connecting Cable TV or Antenna)

Connecting Directly
to Cable or an
Antenna
Cable and Antenna
16
The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see A); older homes
probably have 300-ohm twin lead cable (see B); other homes may contain
both (see C).
A
VHF Only or VHF/UHF or Cable
75-ohm coaxial
cable
B
VHF Only or UHF Only or VHF/UHF
300-ohm twin lead cable
Antenna connector
C
VHF and UHF
75-ohm coaxial cable
300-ohm twin lead cable
If your cable provider does not feature local channels, you may find this set
up convenient.
CATV cable
(No connection to
TO CONVERTER)
Antenna cable
Select CABLE or antenna (ANT) mode by pressing
control.
To receive channels with an antenna, you need to turn your Cable to OFF
(see page 52) and perform the Auto Program function (see page 53).
VHF/UHF
Rear of projection TV
VHF/UHF
Rear of projection TV
VHF/UHF
Rear of projection TV
U/V Splitter
(not supplied)
AUX
TO
CONVERTER
Rear of projection TV
VHF/UHF
ANT
on the remote