General - Sony SCD-XB780 Service Manual

SCD-XB780
Front Panel Parts
Descriptions
POWER switch
Press to turn on the player.
TIME/TEXT button
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
SACD/CD button
Each time you press the button while playing back a
hybrid disc, the layer to be played back switches
between the HD (Super Audio CD) layer and the CD
layer.
Disc tray
Press A OPEN/CLOSE to open/close the disc tray.
Multi-channel indicator
Turns on when you turn on the player, or when the
Multi-channel Super Audio CD is loaded and select
the Multi-channel playback area by pressing MULTI/
2CH.
Rear Panel Parts Descriptions
ANALOG 2CH OUT L/R jacks
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
ANALOG 5.1CH OUT jacks
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
DIGITAL (CD) OUT COAXIAL connector
Connect to an audio component using the coaxial
digital cable.
DIGITAL (CD) OUT OPTICAL connector
Connect to an audio component using an optical
digital cable.
6
SECTION 2

GENERAL

POWER
TIME/TEXT SACD/CD
PHONES PHONE LEVEL
MENU MULTI/2CH
MIN MAX
6 A OPEN/CLOSE button
Press to open the disc tray.
7 H button
Press to start play.
8 X button
Press to pause play.
9 x button
Press to stop play.
0 l AMS L dial (AMS: Automatic Music Sensor)
When you turn the l AMS L dial
counterclockwise by one click, you go back to the
preceding track; when you turn the l AMS L
dial clockwise by one click, you go to the succeeding
track.
qa PHONES
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
ANALOG DIGITAL(CD)
2CH OUT 5.1CH OUT OUT
FRONT SURR CENTER COAXIAL OPTICAL
L
L
R
R SUB
WOOFER
OPEN CLOSE
qs PHONE LEVEL
Adjust the headphones volume.
qd MENU
Press to enter the menu.
Press to exit from the menu and return to the normal
display.
qf MULTI/2CH button
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
qg Display window
Shows various information.
qh m/M buttons
Press to locate a portion you want to play within a
track.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in and
Super Audio CD cannot be output through DIGITAL (CD) OUT.
This section is extracted from
instruction manual.
AMS
PUSH ENTER
. Those of the