Viewing Or Resetting Timer Settings; Setting Current Day And Time - Honeywell Chronotherm IV T8600D Installation Instructions Manual

T8600D CHRONOTHERM® IV DELUXE PROGRAMMABLE THERMOSTATS
Installer Setup
Number
(Press Time ∆
key to
Select change)
Humidifier
pad monitor.
Ultraviolet air
treatment
(UV) lamp
monitor.
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately.

Setting Current Day and Time

1. Press Set Current Day/Time.
NOTE: On initial powerup or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed
.
Time Set Program
Set Current
Set Current
Run
Wake Leave
Program Day/Time
Day/Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
Time Set Program
Run Set Current
Leave
Wake
Program Day/Time
Day
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
3. Press Time ∆ or Time ∇ until the current time is dis-
played.
NOTE: Tapping the Set Current Day/Time changes the
time in one-hour increments.
Time
Time Set Program
Run Set Current
Leave
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
69-1409—1
Table 3. Thermostat Installer Setup Options. (Continued)
Factory Setting
Display
44 0
45 0
Set Day/Time
PM
Return Sleep
Mon
System Fan
Set Day/Time
PM
Return Sleep
Tue
System Fan
Set Day/Time
AM
Return Sleep
Tue
System Fan
Description Display
Off 1, 2, 3
Off
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Daylight
Time
4. Press Run Program.
.
Run
Program

Viewing or Resetting Timer Settings

When the thermostat activates a timer, the thermostat
M14619
flashes Filter until the timer resets.
1. Reset the timer by pressing the i key until the
expired timer is displayed.
Filter
M14620
2. Press the time
.
Filter
3. Press the Run Program key.
M14621
8
Other Choices
(Press or key to change)
Description
1 – 90 days
2 – 180 days
3 – 365 days
(Time is counted by
calendar days in heat
mode.)
1 1 – 365 days
(Time is counted by
calendar days in any
mode.)
Time Set Program
Run Set Current
Wake Leave Return Sleep
Program Day/Time
Tue
Heat/Cool
Hold Temp System Fan
Day
Settings
Daylight
Copy
Time
Time Set Program
Run Set Current
Wake Leave Return Sleep
Day/Time
Program
Heat/Cool
Hold Temp Day System Fan
Settings
Wake
Daylight
Copy
Time
Days
key to reset the timer.
Days
Actual
Setting
Set Day/Time
AM
DST
M14622
System
Heat
AM
Fan
Tue Room
DST
Auto
M14623
M20243
M20244