Setting Current Day And Time; View Or Reset Timer Settings; Installer System Test - Honeywell T8601D Installation Manual

T8601D CHRONOTHERM

Setting Current Day and Time

1. Press Set Current Day/Time.
NOTE: On initial powerup or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
Set Current
Time Set Program
Run Set Current
Wake Leave
Day/Time
Program
Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
Time Set Program
Run Set Current
Wake Leave
Day Program Day/Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
3. Press Time ∆ or Time ∇ until the current time is dis-
played.
NOTE: Tapping the Set Current Day/Time changes the
time in one-hour increments.
Time
Time
Run Set Current
Leave
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight Copy
Time
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Daylight
Time Set Program
Run Set Current
Wake Leave
Program Day/Time
Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
4. Press Run Program.
Run
Time Set Program
Run Set Current
Wake Leave
Day/Time
Program
Program
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time

View or Reset Timer Settings

When the thermostat activates a timer, the thermostat
flashes Filter until the timer resets.
69-1413—2
®
IV DELUXE ZONE THERMOSTATS
Set Day/Time
PM
Return Sleep
Mon
System Fan
Set Day/Time
PM
Return Sleep
Tue
System Fan
Set Day/Time
AM
Set Program
Return Sleep
Tue
System Fan
Set Day/Time
AM
Return Sleep
Tue
System Fan
DST
AM
Return Sleep
Tue Room
System Fan
Wake DST
1. Reset the timer by pressing the i key until the
expired timer is displayed.
Filter
2. Press the Time ∆ key to reset the timer.
M14619
Filter
3. Press the Run Program key.
NOTE: You can view the number of days remaining at
any time by pressing the i key three or four
times. If more than one timer is active, all active
timers show sequentially when pressing the
M14620
i key several times.

INSTALLER SYSTEM TEST

Use the Installer System Test to check the thermostat
operation. Refer to Table 5 for a list of the available
system tests.
CAUTION
Equipment Damage Hazard.
Minimum compressor off-time is bypassed
M14621
during Installer System Test.
Avoid cycling compressor quickly.
To start the system test:
Press and hold the increase s and decrease t keys at the
same time until 10 appears. All segments of the display
will be displayed before the 10 appears.
See Fig. 11 and 12.
Table 5. Tests Available In Installer System Test.
Test
M14622
Number
10-19 Heating equipment can be turned on and off.
30-39 Cooling equipment can be turned on and off.
40-49 Fan equipment can be turned on and off.
System
Heat
60 0 to Keyboard keys test.
60 19
Fan
Auto
70-79 Thermostat information including date code
M14623
and software versions are displayed.
8
Days
Days
System Test Description
M20243
M20244