Wiring Connection Diagram; Installation Method; Aux Input - Boss MR1630UA User Manual

INSTALLATION

INSTALLATION METHOD

This is an anti-theft installation method.
The main unit has a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL
For optimum anti-skip capability of the unit,
SUPPORT STARP
please ensure the metal support strap is
bolted firmly to the car chassis.
DASHBOARD
METAL MOUNTING SLEEVE
Install the soft plastic trim ring, then install
the front panel, the front panel is removable.
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time.
To attach the removable faceplate, first press the below
side of the faceplate, then push the removable faceplate in
horizontal direction as the arrow shown in the right illustration,
until you hear it
BOSS AUDIO CAR STEREOS
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
SOFT PLASTIC TRIM RING
FRONT PANEL
" "
click .
To remove the removable faceplate, press the button in the
'
centre of the faceplate s bottom, then pull it in horizontal
direction as arrows shown in the right illustration.

Wiring connection diagram

SUBWOO FER LINE OUT(BLACK)
RED R

AUX INPUT

(BLACK)
WHITE L
BLACK
CAR AUDIO SYSTEMS