Pciex16 - Asus H97-PLUS User Manual

CPU Graphics Memory [Auto]
Allows you to set the system memory size allocated to DVMT 5.0 used by the CPU
graphics. Configuration options: [Auto] [32MB] [64MB] [96MB] [128MB] ~ [448MB]
[480MB] [512MB]
Render Standby [Auto]
This item allows you to enable Intel
power use when the system is idle. Configuration options: [Auto] [Disabled] [Enabled]
CPU Graphics Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi‑monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Disabled] [Enabled]
DMI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI‑E 2.0 speed.
DMI Gen 2 [Auto]
Set this item to [Enabled] to run DMI at PCI‑E 2.0 speed. Configuration options: [Auto]
[Enabled] [Disabled]
NB PCI-E Configuration
Allows you to configure the NB PCI Express settings.
PCIEx16_1 Link Speed [Auto]
Allows you to configure the PCIEx16 speed for slot 1. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Configuration
Allows you to configure the memory configuration parameters.
Memory Scrambler [Enabled]
Set this item to [Enabled] to support high frequency DRAMs for a better stability.
Configuration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64‑bit operating
systems. Configuration options: [Enabled] [Disabled]
2.6.5 USB Configuration
The items in this menu allow you to change the USB‑related features.
The USB Devices item shows the auto‑detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
2‑34
Your system supports the USB devices in legacy operating systems.
Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
Graphics Render Standby support to reduce iGPU
®
Chapter 2: Getting started