System Agent Configuration; Graphics Configuration - Asus H97-PLUS User Manual

Atx motherboard

Hide thumbs Also See for H97-PLUS:

Manual (22 pages)

Table of Contents

SATA Mode Selection [AHCI]

Allows you to set the SATA configuration.

[Disabled]

Disables the SATA function.

[IDE]

Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI]

Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advanced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally

optimize the order of commands.

[RAID]

Set to [RAID Mode] when you want to create a RAID configuration from the

SATA hard disk drives.

The following item appears only when you set the SATA Mode Selection to [RAID].

Pcie Nand Configuration [Auto]

This item allows you to enable or disable PCIe NAND. Configuration options: [Auto]

[Disabled] [Enabled]

Aggressive LPM Support [Disabled]

This item is designed for LPM (link power management) support with a better energy saving

conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration

options: [Disabled] [Enabled]

S.M.A.R.T. Status Check [On]

S.M.A.R.T. (Self‑Monitoring, Analysis and Reporting Technology) is a monitoring system that

shows a warning message during POST (Power‑on Self Test) when an error occurs in the

hard disks. Configuration options: [On] [Off]

Hot Plug [Disabled] (SATA6G_1 - SATA6G_6)

These items allow you to enable/disable SATA Hot Plug Support. Configuration options:

[Disabled] [Enabled]

2.6.4