Asus H97-PLUS User Manual page 52

When the CPU Core Ratio is set to [Sync All Cores] or [Per Core], the following items
appear:
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1‑Core Limit
value that must be higher than or equal to the 2‑Core Ratio Limit.
2-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 2‑Core Limit
value that must be higher than or equal to the 3‑Core Ratio Limit.
If you assign a value for 2‑Core Ratio Limit, do not set the 1‑Core Ratio Limit to [Auto].
3-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 3‑Core Limit
value that must be higher than or equal to the 4‑Core Ratio Limit.
If you assign a value for 3‑Core Ratio Limit, do not set the 1‑Core Ratio Limit and 2‑Core
Ratio Limit to [Auto].
4-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 4‑Core Limit
value that must be higher than or equal to the 3‑Core Ratio Limit.
If you assign a value for 4‑Core Ratio Limit, do not set the 1‑Core Ratio Limit, 2‑Core Ratio
Limit, and 3‑Core Ratio to [Auto].
2.5.3 Min. CPU Cache Ratio [Auto]
This item allows you to set the minimum possible ratio on the Uncore part of the processor.
Use the <+> or <‑> keys to adjust the value. The values depend on the CPU installed.
2.5.4 Max. CPU Cache Ratio [Auto]
This item allows you to set the maximum possible ratio on the Uncore part of the processor.
Use the <+> or <‑> keys to adjust the value. The values depend on the CPU installed.
2.5.5 CPU Ratio Tuner [Auto]
Enable this item may enhance the overclocking capability of non‑K series CPUs.
Configuration options: [Auto] [Enabled] [Disabled]
2.5.6 BCLK Frequency: DRAM Frequency Ratio [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]
[100:133]
[100:100]
2-20
DRAM speed is set to the optimized settings.
The BCLK frequency to DRAM speed ratio is set to 100:133.
The BCLK frequency to DRAM speed ratio is set to 100:100.
Chapter 2: Getting started