Serial Port Connector (10-1 Pin Com); Internal Connectors - Asus H97-PLUS User Manual

1.7.2

Internal connectors

1.

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
H97-PLUS
H97-PLUS Serial port (COM) connector
The COM module is purchased separately.
2. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
H97-PLUS
H97-PLUS Fan connectors
• DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
DO NOT place jumper caps on the fan connectors.
• Ensure that the CPU fan cable is securely installed to the CPU fan connector.
ASUS H97-PLUS
COM
PIN 1
CPU_FAN CHA_FAN2
CHA_FAN1
1-15