Table of Contents
Advertisement
8.
Serial port connector (10-1 pin COM2)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
KFN4-DRE COM Port Connector
9.
ATX power connectors (24-pin ATXPWR1, 8-pin ATX12V1)
These connectors are for an ATX power supply plugs. The power
supply plugs are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
•
Do not forget to connect the 8-pin ATX +12 V power plug;
otherwise, the system will not boot.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
Make sure that your power supply unit (PSU) can provide at least
the minimum power required by your system. See the table below
for details.
KFN4-DRE ATX Power Connector
ASUS KFN4-DRE
COM2
PIN 1
ATXPWR1
ATX12V1
2-27
Advertisement
Table of Contents
