Programming the Engine
Programming the Engine
Query Product Information
Product information could be obtained by reading "Query Product Information"
barcode. The engine will send it to the Host immediately.
"Power ON, Send Product Info", the engine sends product information through
serial port(only) to the Host after Power ON.
Query Product Information
【Pro CMD:0003000】
Power ON, Send Product Info
【Pro CMD:0007010】
The product information is provided as follows:
Title
Remarks
Firmware Ver
Device Firmware Version
Build Time
Device Firmware Version Establishing Time
Device ID
Device Type
App Ver
Device Application Version
uIMG Ver
Device uIMG Version
Date
Device Manufacture Date
S/N
Device serial number
ESN
User-defined device serial number
Manufacture ID
Device Name
Interface
1 types of communication interfaces:
TTL232(EM3000) or RS232(EM2027), baud rate, parity check, data bits, stop bit
1D
Indicate that reading 1D is allowed. Symbols are divided by comma. Additional
features format:
1.
2.
3.
4.
It is in this format: Fixed Length: 2 4 6 8 10 12...
2D
Indicate that reading 2D is allowed. Symbols are divided by comma.
Additional feature format:
Min Message Length -> Max Message Length
Scan Mode
Scan Mode:
1.
2.
3.
nlscan.com
**Power ON, Do not Send Product Info
"+" connect features
Min Message Length -> Max Message Length
"No Check Digit" or "Check Digit"
"Fixed Length: 2~64 even value".
Manual Scan
Auto Scan
Continuous Scan
【Pro CMD:0007000】
Tools
Code Programming ON
Code Programming OFF
Page 24