Data Bits Transmitted; Stop Bits - Newland FM420 Integration Manual

RS232 Interface RS232 Interface
Serial Port

Data Bits Transmitted

Select data bits transmitted to be 5, 6, 7 and 8. Ensure the selections on
the engine and the Host are the same.
** 8 Data Bits
【Pro CMD：0103030】
7 Data Bits
【Pro CMD：0103020】

Stop Bits

Stop bit follows every byte to indicate the end of transmission and the start of the next
transmission.
Default 1 stop bit.
**1 Stop Bits
【Pro CMD：0102000】
nlscan.com
Code Programming ON
Code Programming OFF
6 Data Bits
【Pro CMD：0103010】
5 Data Bits
【Pro CMD：0103000】
2 Stop Bits
【Pro CMD：0102010】
Tools
Page 28