Pentax ASAHI SPOTMATIC 23102 Service Manual page 23

hanger A (02041) which is calked to (02018), give a stop to (02019). When thus stopped, the left side of
the tip of (02020) should be positioned along with the scribed line on the side of the mirror housing
(02002) or slightly more to the side of the picture-format than the scribed line. At the same time, the
upper end of the tip of the mirror seat should hit on the bottom surface of the shelf of (02002).
If the aforementioned process does not take place as described, file away the "A" part of (02110) as
illustrated below to facilitate satisfactory functioning. Care must be exercised to file away evenly in
parallel with the surface that existed before attempting to file away.
23102 Page 22