Pentax ASAHI SPOTMATIC 23102 Service Manual page 15

(05010) should not touch the upper part of the top selector gear (05035).
(4) Assembly and Adjustment of the "cocked" Indicator
The "cocked" indicator (05029) must be placed between the high speed cam (05219 or 05319) and the
top selector gear retainer plate (05015). Adjustment in this connection should be made by properly
bending (05029) with tweezers. Contact of (05029) with either (05019) or (05015) results in
irregularity of shutter speeds.
(5) Assembly and Adjustment of Speed Selector Disc
Affix the bulb cam (05021) and the pallet release cam (05057) to the slow speed cam (05020) with two
screws (SM 1.4 x 2.0).
Insert (05057) into the lower part of the speed selector disc shaft (05042—2) of the shutter rest
(05002), the speed selector disc (05058—2) through its upper part, and fasten them with two screws
(REM 1.7 x 3.5).
23102 Page 14