Mirror Housing; Points To Be Borne In Mind When Making Adjustment - Pentax ASAHI SPOTMATIC 23102 Service Manual

Install the rapid wind lever (03003) onto (03034) and fasten it with the special tool 231 K-C 03-A.
When (03003) is cocked with one single stroke, the part "B" of (03034) must not hit (03004), however, it may
hit (03034) in sectional cocking.

2. Mirror Housing

a. POINTS TO BE BORNE IN MIND WHEN MAKING ADJUSTMENT
Assembly of the mirror housing is comparatively easy. Consequently, only the points that should be borne in
mind when fixing and/or adjusting the parts are summarized below:
(1) When bonding the ground glass frame B (02109) to the mirror housing (02002), see to it that it is tightly
and securely bonded with Pliobond on the shelf of the mirror housing (02002). If incorrectly bonded it
may float or drift from the shelf and cause focus error.
23102 Page 20